![Alibi Yacht Sales [logo]](/images/logo_corner_new.png){kind=logo}
Taswell 58 Raised Salon Specifications
Specifications
- Dimensions
- Construction
- Steering System
- Deck Equipment
- Tankage
- Plumbing
- Electrical System
- Engine System
- Lewmar Winches
- Spar & Riggings
- Sails
Dimensions
| L.O.A.: | 58'0" / 17.68m |
|---|---|
| L.W.L.: | 47'11" / 14.61m |
| BEAM: | 16'6" / 5.03m |
| DRAFT (SCHEEL KEEL): | 6'3" / 1.91m |
| DISPLACEMENT: | 65,000 lbs / 29,485 kg |
| BALLAST (LEAD): | 19,600 lbs / 8,891 kg |
| SAIL AREA (MAIN + 100% TRIANGLE): |
1.426 ft2 / 132m2 |
| MAIN (9.0 oz): | 651 ft2 / 60m2 |
| STAYSAIL (9.0 oz): | 271 ft2 / 27m2 |
| YANKEE (7.2 oz): | 759 ft2 / 70m2 |
Construction
- GRP hull, hand-lay-up lamination complied with Lloyd's specifications. ABS certificate available with extra charge.
- The first three layers of hull laminated with Vinylester resin
- Deck and cabin side structure with end grain Balsa core
- Hull constructed with foam-filled longitudinal stringers on port and starboard side and reinforced by unidirectional roving tape.
- GRP rudder with S/S stock and reinforced by S/S frames
- Bronze seacocks and hull fittings are fully bonded
- Scheel keel with external cast lead ballast
Steering System
- GRP molded pedestal equipped with EDSON cable steering system, 44" steering wheel
- Optional hydraulic steering system for inside steering stations with 24" wheel if required
- Emergency tiller
Deck Equipment
- Teak deck, cockpit seat, cockpit well grating, cockpit coaming top, sun bath recess, transom swimming platform to be optional items
- 316 S/S deck fittings
- S/S chain plates
- S/S bow pulpit with FWD access and S/S stern pulpit with center access and folding-down swimming ladder
- 12 Lewmar ocean portlights in hull, 4 Lewmar STD portlights on cabin side
- Aluminum toe rail, fair leads, and S/S cleats
- S/S lifeline stanchions
- S/S hand rail over cabintop
- Lewmar sheet tracks and cars
- Deck hatches over every cabin salon area and over cabin galley salon areas
- Six (6) dorade vents with S/S protect guards
- One (1) external gas tank locker insulated from interior for two (2) 20 lbs gas tank storage
Tankage
- One (1) black iron fuel tank, total capacity 207 gal
- Water tanks in 2/S tanks, total capacity 270 gal
- Two GRP holding tanks, total capacity 25 gal for FWD and AFT heads
Plumbing
- Hot and cold water pressure system with one 12V fresh water pump and two (2) accumulator tanks
- 110V/220V and engine heat exchange assist water heater, capacity 15 gal
- One fresh water foot pump in galley
- One salt water foot pump in galley
- One electrical bilge pump
- One manual bilge pump
- Two shower sump pumps for forward and aft shower rooms
Electrical System
- BASS electrical distribution panel: DC 12V/AC 110V or 220V system STD
- YANMAR engine control panel
- One 50A/110V or 40A/220V shore power connector
- Four (4) 200AH batteries with GRP boxes, starting for house and one 120A for engine
- One engine room blower
Engine System
- YANMAR 4LH-HTE 4 cylinder diesel 2.57:1 reduction gear 140 HP
- Sound insulation in engine compartment
- 24"Ø x 17" x 3B RH bronze propeller
- 2"Ø, 304 S/S propeller shaft
- Space for generator installation
- LAS-DROP propeller shaft sealer
Lewmar Winches
- 66 STC X 2: primary sheet
- 54 STC X 1: primary halyard
- 48 STC X 1: main sheet, staysail sheet, reefing, main outhaul, vang/kicker
- 44 STC X 1: main halyard
- 48 STC X 1: secondaries
Spar & Riggings
- FORESPAR mast section with double spreader and boom
- Running riggings including halyards, topping lift, outhauls, and reefing
- Standing rigging to be 1 X 19 S/S wire
Sails
- UK Tetron working sails including: main with cover, staysail with bag, yankee with bag
Note: all specifications are subject to change without notice.